Motor and Feeder Protection |
SE-Comm-RIS v3.9
|
This program gives remote access to metering, control, data logging, and programming features on the MPS, MPU-32, FPS, and the FPU-32. Set points can be accessed individually or downloaded as a file. Metered data can be observed on a single screen. Logged data can be downloaded and saved on a computer. Protective curves can be plotted. Version 3.6 is required for use with the FPS Feeder Protection System. |
SE-COMM16 v1.54a |
The SE-COMM16 communications software enables the user to communicate with the MPU-16A, FPU-16, and LP2000, and includes the Allen Bradley DF1 and Modbus RTU protocols. This version also includes support for data logging. |
SE-PLOT
|
SE-Plot functionality is now included in SE-Comm-RIS. |
Monitor für neutralen Erdungswiderstand
|
SE-MON330 v3.3
|
Diese Software wird verwendet, um Daten von SE-330, SE-330AU und SE-330HV Überwachungsgeräten für Sternpunkt-Erdungswiderstände zu empfangen. Es zeigt die sowohl Einstellungspunkte des Relais als auch die gemessenen Werte an. Die Software bietet Messwerterfassung in auswählbaren Intervallen. SE-MON330 beinhaltet den NGR-Grenzwertüberwachungsassistent, der Grenzwertempfehlungen für SE-325, SE-330, SE-330AU und SE-330HV Erdungswiderstandsmonitore liefert. Die Version 2.2 ermöglicht es, einen Eintrag von 10 Ereignissen auf SE-330 Geräten mit der Firmware-Version 10 oder höher einzusehen.
|
Schleppkabelschutz
|
SE-MON-GFGC
|
Dieses Programm dient dem Empfang von Daten von einem SE-145 Erdschluss-Erdungsprüfungsmonitor.
|
Temperature Monitoring |
SE-Comm-RTD |
Dieses Programm wird verwendet, um mit bis zu 63 SIO-RTD-Modulen zu kommunizieren. Es kann verwendet werden, um Eingaben bei SIO-RTD-Modulen entweder als 4-20 mA oder als einen von mehreren RTD-Typen zu konfigurieren. Die gesammelten Daten können exportiert werden. Die Software besitzt eine automatische Startfunktion, sodass das Programm bei einem Computerneustart geöffnet wird. Im SE-COMM-RTD können bis zu acht Eingabesignale verfolgt werden.
|
Littelfuse Startco SE-Flash Firmware Upgrade Software |
Download SE-Flash v2.00 |
SE-Flash is used to update the firmware in the EL731, MPU-32, FPU-32, MPS and SE-330, and for the communications module in the MPU-16A and FPU-16. An RS-232-to-RS-485 converter is required for FPS and MPS updates; a CA-945 adapter may be required for FPU-32 and MPU-32 updates; an AC700-CUA-00 Firmware Upgrade Module is required for the EL731; and a 9-pin serial cable is required for SE-330 firmware updates. For many PC’s, a USB-to-RS-232 adapter will also be needed.
• EL731 Flash Update Instructions
• MPS Flash-Update Instructions
• MPU-32 Flash-Update Instructions
• SE-330 Flash Update Instructions
|