|
-
-
Wasserdichte Abdeckung (IP66) für den EL731 bei der Tafelmontage ...Mehr Infos
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
The BZ Front Panel Mounting Kit provides an easy method of through-the-panel mounting of 8 or 11 pin...Mehr
-
Montagemethode: Mount on panels up to 0.125 in. (3.2 mm) thick
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
The C103PM is an industry standard 35mm aluminum or steel DIN rail. The C103PM aluminum rail is avai...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
The NDS-8 is an 8-pin, 35 mm DIN rail or surface mount octal socket. The NDS-11 is an 11-pin 35 mm D...Mehr
-
Eingang Spannung (V): 10A @ 300 Vac
-
Montagemethode: Surface mount with two #6 (M3.5 x 0.6) screws or DIN rail mount
-
Gewicht (Pfd./g): 0 kg
|
-
-
Metal NEMA-3R electrical box with lenses for viewing the single-phase pump protection relay status l...Mehr
-
Klemmenart: Four knockouts: 1/2 in and 3/4 in (one on each side and two on the bottom)
-
Montagemethode: Surface Mount (four pre-drilled concave holes)
-
Abmessungen: 6 H x 6 W x 4.5 D in. (152.4 x 152.4 x 114.3 mm)
|
-
-
The OT08PC is an 8-pin 35 mm DIN rail or surface mount octal socket rated at 10A @ 600VAC. The OT11P...More
-
Eingang Spannung (V): 10A @ 300 Vac max., 10A @ 600 Vac max.
-
Klemmenart: For use with 12 to 22 AWG (3.2 to 0.33 mm²) wire sizes
-
Montagemethode: Surface mount with two #6 (M3.5 x 0.6) screws or DIN rail mount
|
-
-
Surface and DIN rail mount adapters for ASQU, ASTU, DSQU, and DSTU series timers....More
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
The P1011-6 is an 8-pin surface mount octal socket with binder head screw terminals. Rated 10A @ 600...More
-
Eingang Spannung (V): 10A @ 600 Vac max.
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
P1023 Mounting Brackets for the 2 x 2 or 2 x 3 timers and are screw or DIN rail mount. See datasheet...More
-
Montagemethode: Supplied with two #10 screws for 0.75 in. (19 mm) and 1 in.(25.4 mm) thick modules
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
The PSC series are hold-down clips and brackets that work with the socket accessories to mount plug-...Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Steel enclosure for protecting a Littelfuse RM1000 remote
communications monitor from adverse affect...Mehr
-
Montagemethode: Use RM-1000 hardware
-
Abmessungen: 6.4 H x 6.3 W x 1.7 D in. (162.6 x 160 x 43.2 mm)
-
Gewicht (Pfd./g): 0 kg
|
-
-
12-pin surface Rectangle Socket....More
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Wasserdichte Hülle für Außenanwendungen. Zubehör für die MPU-32 Motorschutzeinheit und die FP ...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Die Grundplatte PGK-0016 wird zum Ersatz der Relais GE Multilin 169, 269, und 369 verwendet....Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Ein Set, um leiterplattenmontierte Relais in oberflächen...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Zur Verwendung für grobe Sicherungen und beim Austausch des GE Multilin P4A....Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Wird bei Austausch des AB Bulletin 1406... Mehr
-
Abmessungen: 6 H x 6 W in.
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
Beim Austausch von GEC/MCGG-Fehlerstromrelais zu verwenden Erfordert PMA-55 oder PMA-60... Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Zum Austausch von Multilin 139/239... Mehr
-
Abmessungen: 8,3 H X 4,8 B
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Beim Austausch von FPL-GFRM-Fehlerstromrelais zu verwenden. Erfordert PMA-55 oder PMA-60... Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Verwendung beim Austausch des GE Lodtrak III ...Mehr
-
Abmessungen: 20,3 H X 6,6 B
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Verwendet zum Ersatz eines Atkinson Omser II mit einem Monitor der SE-130-Baureihe...Mehr
-
Abmessungen: 9.5 H x 7 W in.
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
Verwendet zum Auswechseln von Relais im GE S1 Gehäuse ... Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Verwendung beim Austausch des GE Lodtrak III ...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Zur Verwendung beim Austausch von GE- und Westinghouse-FT-11-Relais ...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Zur Verwendung bei Austausch des GE Multilin 169, 269 oder 369 ... Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Für grobe Sicherungen und bei Austausch des AB Bulletin 1406...More
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Verwendet zum Ersatz des Federal Pioneer MGFR Erdleitungsmonitors durch ein SE-70X... Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Tafelmontagenadapter zum Ersatz des GE Multilin 169, 169 Plus, 269 und 369 durch den DB-9... Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Zur Verwendung bei Austausch des GE Multilin 469 ... Mehr
-
Abmessungen: 9.8 H x 8.7 W in.
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
|
-
-
Zur Tafelmontage von SE-601 und SE-701 ...Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Verwendet, um das Relais zu montieren; IP-53- und NEMA-3-Rating, manipulationsgeschützt...More
-
Abmessungen: 3.5 H x 3.9 W in.
-
Gewicht (Pfd./g): 0 kg
-
NEMA-Einstufung: 3
|
-
-
Ermöglicht den Einsatz des Relais in feuchten und staubigen Umgebungen. Bietet IP65-Schutz für die Relais der SE-13X- und ...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Wasserdichte Abdeckung. Tamper-resistant. IP65 protection....More
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Wasserdichte Abdeckung. Manipulationsgeschützt. IP65-Schutz. Zubehör für SE-145...Mehr
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|
-
-
Wasserdichte Abdeckung. Manipulationsgeschützt. IP65-Schutz. Zubehör für MPS und FPS...Mehr
-
Gewicht (Pfd./g): 0 kg
-
Keine Informationen verfügbar
-
Keine Informationen verfügbar
|