HRV43AN – HRV Series

Baureihe: HRV
Fragen? Contact Littelfuse Support
External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The HRV combines the accuracy of microcontroller based circuitry with an electromechanical relay output. The HRV's switching capacity allows direct control of loads like compressors, pumps, motors, heaters, and lighting. The HRV "S" version provides a vend time after the selected number of initiate switch closures to start is reached. The HRV "A" version includes all of the "S" features and allows the total vend time to be extended for each additional initiate switch closure. The HRV is ideal for cost sensitive single coin or token vending machines. The electronic circuitry is encapsulated to protect against humidity and vibration.


Funktionsweise
Coin Totalizer & Vending Timer (“S” Version):
Input voltage must be applied prior to & during operation. When the total number of S1 initiate switch closures equals the number to start set on the lower 3 DIP switches, the load energizes and the vending time set on the upper 7 DIP switches begins. At the end of the vending time, the load de-energizes and the vending time is reset. Closing the initiate switch during vend timing will have no affect on vend time delay.
Accumulating Vending Timer (“A” Version):
Input voltage must be applied prior to & during operation. When the total number of S1 initiate switch closures equals the number to start set on the lower 3 DIP switches, the load energizes and the vending time starts. For every initiate switch closure, the HRV unit adds one time per coin period, as set on the upper 7 DIP switches, to the total vending time.
Operation Note: If S1 is closed when input voltage is applied, the output remains de-energized and the S1 counter remains at zero closures. At least one “vend time” and one “closures to start” DIP switch must be in the “ON” position for proper operation.
Reset: Removing input voltage resets the vend time delay, the S1 closure counter, and de-energizes the output relay.

Property (Mouseover for details) Value
Input Voltage (V) 120 V ac
Input Tolerance (%) -20% - 10%
Input AC Line Frequency (Hz) 50/60
Output Type Electromechanical relay
Output Form Non-isolated SPDT - NO
Output Load Rating (VA) General Purpose: SPDT-NO: 125/240 V ac ≅30 A; SPDT-NC ≅15 A; Resistive: SPDT-NO ≅30 A for 125/240 V ac and 20 A for 28 V dc; SPDT-NC ≅15 A for 125/240 V ac and 10 A for 28 V dc; Motor Load: SPDT-NO ≅1 hp for 125 V ac and 2 hp for 240 V ac; SPDT-NC ≅1/4 hp for 125 V ac and 1 hp for 240 V ac
Time Delay Range Adjustable 0.1 - 12.7 m
Reset Time (ms) ≤150
Count Range 1 - 7 counts to start; maximum: 250
Counter Function/Output Mechanical (counts on switch closure)
Adjustment Type 7 of a 10 position DIP switch
Repeat Accuracy (%) ±0.1% or 20 ms whichever is greater
Setting Accuracy 0% to 2% or 50 ms whichever is greater
Setpoint vs Ambient Temperature and Operating Voltage (%) ≤±2%
Switch Open Time Minimum (ms) ≥20
Switch Closure Time Minimum (ms) ≥20
Surge Protection IEEE C62.41-1991 Level A
Insulation Resistance ≥100
Circuitry Encapsulated
Life Electrical: 1 x 10⁵ 3 x 104 for 1 hp - 6000 for 1/4 hp 1 hp and 2 hp; Mechanical: 1 x 10⁶
Power Consumption ≤4 VA
Termination Type 0.25 in. (6.35 mm) male quick connect terminals
Mounting Method Surface mount with 1 #10 (M5 x 0.8) screw
Operating Temperature -40° to 70°C (-40° to 158°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% relative : non-condensing
Dimensions 3 H x 2 W in. (76.7 x 51.3 mm)
Weight (lbs/g) 0 Kg
Dimensions 3 H x 2 W in. (76.7 x 51.3 mm)
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.