TVW6510S0.4S – TVW Series – Voltage Monitor Series

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
       
       
       
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The TVW Series provides protection for motors and other sensitive loads. Continuously measures the voltage of each of the three phases using a microcontroller circuit design that senses under and overvoltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. Includes a trip delay to prevent nuisance tripping and a restart delay to prevent short cycling after a momentary power outage.


Funktionsweise
Upon application of line voltage, the restart delay begins. The output is de-energized during restart delay. Under normal conditions, the output energizes after the restart delay. Undervoltage, overvoltage, and voltage unbalance must be sensed for the complete trip delay period before the output de-energizes. The restart delay begins as soon as the output de-energizes. If the restart delay is completed when a fault is corrected, the output energizes immediately. The output will not energize if a fault is sensed as the input voltage is applied. If the voltage selector is set between two voltage marks (i.e. between 220 and 230V), the LED will flash red rapidly. The TVW provides fault protection at the lower of the two line voltages (i.e. 220V).
Reset: Reset is automatic upon correction of a fault.

Property (Mouseover for details) Value
Input Voltage (V) 208; 220; 230; 240 Vac
Input Tolerance (%) -0.5
Input Type 3-phase delta or WYE with no connection to neutral
Input AC Line Frequency (Hz) 50 - 100
Input Phase Sequence A; B; C
Output Type Isolated SPDT
Output Load Rating (VA) 10 A resistive @ 125 Vac; 5 A @ 250 Vac; 1/4 hp @ 125 Vac
Reset Time (ms) Automatic
Response Time (ms) Phase loss: ≤200 ms; Phase reversal: ≤200 ms
Restart Delay Range 0.4 s fixed
Restart Delay Tolerance (%) ±15% or ±0.2 s whichever is greater
Trip Delay Range 10 s fixed
Trip Delay Tolerance (%) ±15% or ±0.1 s whichever is greater
Trip Delay vs Temperature Trip variation: ≤±2%
Overvoltage Trip Voltage (%) 109 - 113% of the adjusted line voltage
Overvoltage Reset Voltage (%) ≅-3% of the trip voltage
Undervoltage Trip Voltage 88 - 92% of the adjusted line voltage
Undervoltage Reset Voltage (%) ≅+3% of the trip voltage
Voltage Unbalance Trip Point (%) 5% fixed
Voltage Unbalance Reset (%) ≅-0.7% unbalance
Phase Loss ≥25%
Power Consumption ≅2 W
Dielectric Breakdown ≥1500 input to output terminals
Surge Protection IEEE C62.41-1991 Level B
Type of Detection Voltage detection with delayed trip and automatic reset
Termination Type 0.25 in. (6.3 mm) male quick connect terminals
Mounting Method Surface mount with one #8 (M5 x 0.8) screw
Operating Temperature -40° to 55°C (-40° to 131°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 95% non-condensing
Dimensions 2 H x 2 W x 1.25 D in. (50.8 x 50.8 x 31.8 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.