DLM Series – Voltage Monitor Series - Littelfuse DLM Voltage Monitoring Relays Provide Superior Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The DLM (DLMU) series is a universal voltage, three-phase voltage monitor. This monitor continuously measures the voltage of each of the three phases with microcontroller accuracy and compares the value to preset trip points. It separately senses phase reversal and loss; over, under and unbalanced voltages; and over or under frequency.

Protection is ensured during periods of large average voltage fluctuations or when regenerated voltages are present. The unit trips within 200 ms when phase loss is detected. Adjustable time delays are included to prevent nuisance tripping and short cycling of sensitive equipment. The isolated, 10 A, SPDT, and 2 A alarm output relay contacts trip when a phase voltage exceeds the trip limits for the trip delay. Nominal line voltage, voltage unbalance, and time delays are knob adjustable. The phase loss setpoint and the acceptable frequency range are fixed. Both delta and wye systems can be monitored - no connection to neutral is required.

See datasheet for operation details.

Eigenschaften

  • Proprietary microcontroller-based circuitry
  • Universal line voltage range
  • DIN-rail (35mm) or surface mounting
  • LED-Anzeige
  • User-adjustable time delays

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Termination TypeMounting MethodDimensionsWeight (lbs/g)HumidityInput AC Line Frequency (Hz)Input Phase SequenceInput TypeInput Voltage Maximum (V)Output Load Rating (VA)Output TypeOver/Under Frequency (%)Overvoltage Reset Voltage (%)Overvoltage Trip Voltage (%)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)LuftfeuchtigkeitInput AC Line Frequency (Hz)Input Phase SequenceInput TypeMax. Eingangsspannung (V)Output Load Rating (VA)AusgabeartOver/Under Frequency (%)Overvoltage Reset Voltage (%)Overvoltage Trip Voltage (%)BeständeMusterVergleichen
DLMHBRAAA 500 - 600 VacScrew terminal with captive wire clamps for up to #14 AWG (2.5 mm²) wireSurface mount with two #8 (M4 x 0.7) screws or snap on 35mm DIN rail4.33 H x 2.95 W x 1.97 D in. (110 x 75 x 50 mm)0 kg95% non-condensing50 / 60A; B; C; L1; L2; L33-phase delta or WYE with no connection to neutral60010 A resistive @ 240 Vac; 8 A resistive @ 277 Vac; NO-1/4 hp @ 120 Vac; 1/3 hp @ 240 VacIsolated electromechanical relay±4%; Reset ±3%; 50 / 60 Hz≅-3% of the trip voltage109 - 113% of the adjusted line voltagePrüfen Order
DLMUBLAAA 200 - 480 VacScrew terminal with captive wire clamps for up to #14 AWG (2.5 mm²) wireSurface mount with two #8 (M4 x 0.7) screws or snap on 35mm DIN rail4.33 H x 2.95 W x 1.97 D in. (110 x 75 x 50 mm)0 kg95% non-condensing240 V ac: 50/60; 380 V ac: 50; 480 V ac: 60A; B; C; L1; L2; L33-phase delta or WYE with no connection to neutral55010 A resistive @ 240 Vac; 8 A resistive @ 277 Vac; NO-1/4 hp @ 120 Vac; 1/3 hp @ 240 VacIsolated electromechanical relay±4%; Reset ±3%; 50 / 60 Hz≅-3% of the trip voltage109 - 113% of the adjusted line voltagePrüfen Order
DLMUBNAAN 200 - 480 VacScrew terminal with captive wire clamps for up to #14 AWG (2.5 mm²) wireSurface mount with two #8 (M4 x 0.7) screws or snap on 35mm DIN rail4.33 H x 2.95 W x 1.97 D in. (110 x 75 x 50 mm)0 kg95% non-condensing240 V ac: 50/60; 380 V ac: 50; 480 V ac: 60A; B; C; L1; L2; L33-phase delta or WYE with no connection to neutral55010 A resistive @ 240 Vac; 8 A resistive @ 277 Vac; NO-1/4 hp @ 120 Vac; 1/3 hp @ 240 VacIsolated electromechanical relay±4%; Reset ±3%; 50 / 60 Hz≅-3% of the trip voltage109 - 113% of the adjusted line voltagePrüfen Order
DLMUBRAAA 200 - 480 VacScrew terminal with captive wire clamps for up to #14 AWG (2.5 mm²) wireSurface mount with two #8 (M4 x 0.7) screws or snap on 35mm DIN rail4.33 H x 2.95 W x 1.97 D in. (110 x 75 x 50 mm)0 kg95% non-condensing240 V ac: 50/60; 380 V ac: 50; 480 V ac: 60A; B; C; L1; L2; L33-phase delta or WYE with no connection to neutral55010 A resistive @ 240 Vac; 8 A resistive @ 277 Vac; NO-1/4 hp @ 120 Vac; 1/3 hp @ 240 VacIsolated electromechanical relay±4%; Reset ±3%; 50 / 60 Hz≅-3% of the trip voltage109 - 113% of the adjusted line voltagePrüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.