601-CS-D-P1 – 601-CS-D-P1 Series – Three-Phase Power Monitor Series

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
       
       
 
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The 601-CS-D-P1 3-phase power monitor is a fully programmable electronic power monitor designed to monitor 3-phase systems. The 601-CS-D-P1 has a single relay that can be configured as a general purpose network output or to trip on ground faults. The 601-CS-D-P1 monitors ground fault current, phase currents, phase voltages, power factor and frequency. The RS485MS-2W communications module allows the 601-CS-D-P1 to communicate using the Modbus RTU protocol. The Modbus connection can be used to monitor power parameters, setup the device or control the fault relay. A DeviceNet™ communications I/O module (CIO-601CS-DN-P1) is available as well. This CIO module only works with the 601-CS-D-P1 unit. It is used for sending the information from the 601-CS-D-P1 over a DeviceNet™ network. It also provides I/O capabilities and the ability to set the parameters of the 601-CS-D-P1.
Property (Mouseover for details) Value
Input Voltage (V) 200 - 480 Vac
Maximum Input Power 10
Input AC Line Frequency (Hz) 50 / 60
Output Form SPDT
Output Load Rating (VA) Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A @ 240 Vac
Full Load Amp Range (A) 0.5 - 175 (direct); 176 - 800 (external CTs required)
Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<175 A direct)
Voltage Accuracy (%) ±1%
Current Accuracy (%) ±3% (<100 A direct)
Ground Fault Accuracy (%) ±3%
Surge Protection IEC: 61000-4-5 Level 3 2 kV line-to-line; Level 4 4 kV line-to-ground
Protection Class IP20 (finger safe)
Pollution Degree 3
Communications Protocol Modbus RTU
Termination Type Torque: 7 in-lbs
Mounting Method Surface mount (4 - #8 screws) or DIN rail mount
Operating Temperature -20° to 70°C (-4° to 158°F)
Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
Humidity 10 - 95% non-condensing per IEC 68-2-3
Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
Weight (lbs/g) 0 Kg
Check Stock Yes
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.