LLC2 Series – Open Board Liquid Level Controls Series - Littelfuse LLC2 Open Board Liquid Level Controls Provide Superior Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The LLC2 series is a dual-probe, conductive liquid level control designed for OEM equipment and commercial appliance applications. Models are available for fill or drain operation. Transformer-isolated 12 V ac is provided at the probes to prevent electrolysis. A trickle current of less than 1 mA determines the presence or absence of liquid between the probes and common. On adjustable units, the sensitivity adjustment allows accurate level sensing while ignoring foaming agents and floating debris. The LLC2 series printed circuit board is conformally coated to resist moisture and corrosion.

Funktionsweise

Drain (pump-down mode): When the liquid level rises and touches the high probe, the output relay energizes and remains energized until the liquid level falls below the low probe. The output relay then de-energizes and remains de-energized until the liquid again touches the high probe.

Fill (pump-up mode): When the liquid level falls below the low probe, the output relay energizes and remains energized until the liquid level rises and touches the high probe. The output relay then de-energizes and remains de-energized until the liquid level again falls below the low probe.

Eigenschaften

  • Isolated 12 V ac voltage on probes
  • Open PCB design
  • Sensitivity adjustment
  • Conformally coated PCB

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Control TypeInput AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)Output TypeSense Resistance ToleranceSense Resistance (Ohms)Sense VoltageStorage Temperature (F/C)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
Ausgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Control TypeInput AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)AusgabeartSense Resistance ToleranceFühlerwiderstand (Ohm)Sense VoltageLagertemperatur (F/C)BeständeMusterVergleichen
LLC24A2AN 120 VacIsolierter SPDTTerminal blocks for up to #14 AWG (2.5 mm²) wireSurface mount to probe common with two or four #6 (M3.5 x 0.6) screws4 H x 3 W x 2 D in. (101.6 x 76.2 x 50.8 mm)0 kgResistance sensing for high and low level detection of conductive liquids50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 10012 Vac at probe terminals-40° to 80°C (-40° to 176°F)Prüfen Order
LLC24A2F50N 120 VacIsolierter SPDTTerminal blocks for up to #14 AWG (2.5 mm²) wireSurface mount to probe common with two or four #6 (M3.5 x 0.6) screws4 H x 3 W x 2 D in. (101.6 x 76.2 x 50.8 mm)0 kgResistance sensing for high and low level detection of conductive liquids50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relay±10%50 fixed12 Vac at probe terminals-40° to 80°C (-40° to 176°F)Prüfen Order
LLC24B1AC 120 VacIsolierter SPDT0.25 in. (6.3 mm) male quick connect terminalsSurface mount to probe common with two or four #6 (M3.5 x 0.6) screws4 H x 3 W x 2 D in. (101.6 x 76.2 x 50.8 mm)0 kgResistance sensing for high and low level detection of conductive liquids50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relayGuaranteed rangeAdjustable to 10012 Vac at probe terminals-40° to 80°C (-40° to 176°F)Prüfen Order
LLC24B2F50N 120 VacIsolierter SPDTTerminal blocks for up to #14 AWG (2.5 mm²) wireSurface mount to probe common with two or four #6 (M3.5 x 0.6) screws4 H x 3 W x 2 D in. (101.6 x 76.2 x 50.8 mm)0 kgResistance sensing for high and low level detection of conductive liquids50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relay±10%50 fixed12 Vac at probe terminals-40° to 80°C (-40° to 176°F)Prüfen Order
LLC26A1F25C 230 VacIsolierter SPDT0.25 in. (6.3 mm) male quick connect terminalsSurface mount to probe common with two or four #6 (M3.5 x 0.6) screws4 H x 3 W x 2 D in. (101.6 x 76.2 x 50.8 mm)0 kgResistance sensing for high and low level detection of conductive liquids50 / 60-0.310 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical relay±10%25 fixed12 Vac at probe terminals-40° to 80°C (-40° to 176°F)Prüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.

  • Showing 2 items