RM 2000 Series - Remote Monitoring

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The RM2000 is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module. The RM-2000/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly, motor monitoring.
The RM2000 has membrane keypad controls which allow both monitoring and control of a 777 relay through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM-2000 devices from a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or PLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped relay.
The RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM2000 is a simple, cost-effective method for aiding compliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant.

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Termination TypeMounting MethodDimensionsWeight (lbs/g)AddressBaud Rate (Bps)Communications InterfaceCommunications ProtocolCommunications RangeHumidityInput AC Line Frequency (Hz)Input Tolerance (%)LifeMaximum Input PowerStockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)AdresseBaud Rate (Bps)KommunikationsschnittstelleCommunications ProtocolCommunications RangeLuftfeuchtigkeitInput AC Line Frequency (Hz)Input Tolerance (%)LifeMaximum Input PowerBeständeMusterVergleichen
RM2000 115 Vac3 in.-lbs.Surface mountable on backplane using 4 screws6.4 H x 6.1 W x 1.1 D in. (162.6 x 154.9 x 27.9 mm)0 kgA001 - A099300 - 28800RS-485Modbus RTU50 ft; 4000 ft with separate isolated power supplyUp to 85% non-condensing50 / 60±10%3Prüfen Order
RM2000-CBM+ 115VAC3 in.-lbs.Surface mountable using 4 screws6.40 in H x 6.10 in W x 1.10 in D (162.6 x 154.9 x 27.9 mm)1.2 lbs. (19.2 oz. 544.31 g)A001 - A099300 - 28800RS-485Modbus RTU50 ft 4000 ft with separate isolated power supplyUp to 85% non-condensing±10%Mechanical: 100 000 actuations3 W
RM2000-RTDW 115VAC3 in.-lbs.Surface mountable using 4 screws6.40 in H x 6.10 in W x 1.10 in D (162.6 x 154.9 x 27.9 mm)1.2 lbs. (19.2 oz. 544.31 g)A001 - A099300 - 28800RS-485Modbus RTU50 ft 4000 ft with separate isolated power supplyUp to 85% non-condensing±10%Mechanical: 100 000 actuations
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.