234-P Series - Littelfuse 234-P PumpSaver® Provides Exceptional System Protection

234P-al
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The PumpSaver® Plus Model 234-P protects single-phase pumps from dry-well, dead-head, rapid-cycle, jammed impellers, and over/undervoltage conditions. Typical applications include residential waterwells, commercial waterwells, irrigation wells, golf courses, and other sprinkler systems. The Model 234-P is designed to be mounted inside a Grundfos™ control box* to protect ⅓-3 hp, 2- or 3-wire, 230 V pumps. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).

A calibration adjustment allows the 234-P to be calibrated to your specific pumping applications, reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations, overcurrent, and undercurrent. When an abnormality such as loss of suction is detected, the 234-P deactivates its output relay and directly disconnects the pump motor. The 234-P then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the 234-P reactivates its output relay and turns the pump back on. By leaving the restart delay knob in the reset position, the 234-P will operate in manual reset mode.

The Informer displays parameters including calibration points, trip points, run time and last faults. An IR Kit-12 (12" fiber optic kit) allows the Informer to access these parameters even when the 234-P is enclosed in a control box. This is valuable for troubleshooting the pump while it is running.

NOTE: The PumpSaver® models have a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70% - 90% of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, increase the sensitivity closer to the 90% mark, or if you have a very heavy producing well, decrease the sensitivity around the 70% mark.
*The Model 234-P is not recommended for use with the Grundfos Deluxe Control Box.

Eigenschaften

  • Proprietary microcontroller-based circuitry
  • Onboard sensitivity adjustment
  • Adjustable restart delay
  • Built-in IR communications link
  • LED-Anzeige

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Input Load Range (hp)Output
Form
Mounting MethodWeight (lbs/g)Overcurrent Trip ClassInput AC Line Frequency (Hz)Output Load Rating (VA)Overvoltage Trip Voltage (%)Power ConsumptionRapid Cycle Timer (s)Restart Delay RangeTrip Delay RangeUnderload (%)Undervoltage Reset Voltage (%)StockSamples
Katalog-Nr.Eingang
Spannung (V)
Eingangslastbereich (HP)Ausgang
Wechsler
MontagemethodeGewicht (Pfd./g)Overcurrent Trip ClassInput AC Line Frequency (Hz)Output Load Rating (VA)Overvoltage Trip Voltage (%)Power ConsumptionRapid Cycle Timer (s)Restart Delay RangeTrip Delay RangeUnderload (%)Undervoltage Reset Voltage (%)BeständeMuster
234-P 230 Vac1/3 - 3SPSTInside a Grundfos® control box0 kg125% of calibration point50 / 60 (50 will increase all delay timers by 20%)3 hp @ 240 Vac (17 A max.)265 VAC≤5 W4 restarts allowed in 60 s periodOver/Under Voltage: 2 s; All other faults: Manual; 2 - 225 mOvercurrent: 5 s; Dry-well: 4 sAdjustable (70 to 90% of calibrated run power)190 VACPrüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.