ARP Series - Alternating Relay

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED's indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket.


Operation Alternating: When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate.
Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit's input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation.
Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously.
The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Storage Temperature (F/C)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
Ausgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Input AC Line Frequency (Hz)Input Tolerance (%)Output Load Rating (VA)AusgabeartMax. Output
Spannung (V)
Lagertemperatur (F/C)BeständeMusterVergleichen
AR120A-3095 24; 120; 230 VacSPDT; DPDT; cross wired DPDTOctal 8-pin or magnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 6024 V ac: -15% - 20%; 120 and 230 V ac: -20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP23S 24 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-15% - 20%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP41 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP41S 120 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP42S 120 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP43 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP43S 120 VacCross wired DPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP61S 230 VacSPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP62S 230 VacDPDTMagnal 11-pinPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
ARP63S 230 VacCross wired DPDTOctal 8-pin plug-inPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60-20% - 10%10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 VacElectromechanical Relay250-30° to 85°C (-22° to 185°F)Prüfen Order
Teilenummer Teilebeschreibung RoHS Bleifrei RoHS (2015/863/EU)-Zertifikat REACH (SVHC)-Erklärung Halogenfrei REACH (SVHC) Materialdeklaration gemäß IPC
ARP63S ALTERNATING RELAY RoHS Nein 08/22/2018 PbFree Nein 08/22/2018 CoC_RoHS9_ARP63S REACH197_Declaration_with_Pb_ARP63S
Enthält
Wenn die von Ihnen gesuchten umweltbezogenen Produktinformationen nicht auf dieser Registerkarte erscheinen,
füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.