TVW Series – Voltage Monitor Series - Littelfuse TVW Voltage Monitoring Relays Provide Superior Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The TVW series is a three-phase voltage monitor that provides protection for motors and other sensitive loads. It continuously measures the voltage of each of the three phases using a microcomputer circuit design that senses under and overvoltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. This monitor includes a trip delay to prevent nuisance tripping and a restart delay to prevent short cycling after a momentary power outage.

Funktionsweise

Upon application of line voltage, the restart delay begins. The output is de-energized during restart delay. Under normal conditions, the output energizes after the restart delay. Undervoltage, overvoltage, and voltage unbalance must be sensed for the complete trip delay period before the output de-energizes. The restart delay begins as soon as the output de-energizes. If the restart delay is completed when a fault is corrected, the output energizes immediately. The output will not energize if a fault is sensed as the input voltage is applied. If the voltage selector is set between two voltage marks (between 220 and 230 V), the LED will flash red rapidly. The TVW provides fault protection at the lower of the two line voltages (220 V). Reset is automatic upon correction of a fault.

LED Operation

The LED flashes green during the restart delay, then glows green when the output energizes. It flashes red during the trip delay, then glows red when the output de-energizes. It flashes red/green if phase reversal is sensed. If the voltage selector knob is between settings, it rapidly flashes red.

Eigenschaften

  • Proprietary microcontroller-based circuitry
  • Compact design measures 2 in. (50.8 mm) square
  • LED-Anzeige
  • Encapsulated

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Termination TypeMounting MethodDimensionsWeight (lbs/g)Dielectric BreakdownHumidityInput AC Line Frequency (Hz)Input Phase SequenceInput Tolerance (%)Input TypeLifeOutput Load Rating (VA)Output TypeOvervoltage Reset Voltage (%)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Dielectric BreakdownLuftfeuchtigkeitInput AC Line Frequency (Hz)Input Phase SequenceInput Tolerance (%)Input TypeLifeOutput Load Rating (VA)AusgabeartOvervoltage Reset Voltage (%)BeständeMusterVergleichen
TVW5103S5S 208 - 240 Vac0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #8 (M5 x 0.8) screw2 H x 2 W x 1.25 D in. (50.8 x 50.8 x 31.8 mm)0 kg≥1500 input to output terminals95% non-condensing50 - 100A; B; C-0.53-phase delta or WYE with no connection to neutral10 A resistive @ 125 Vac; 5 A @ 250 Vac; 1/4 hp @ 125 VacIsolierter SPDT≅-3% of the trip voltagePrüfen Order
TVW575S1M 208 - 240 Vac0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #8 (M5 x 0.8) screw2 H x 2 W x 1.25 D in. (50.8 x 50.8 x 31.8 mm)0 kg≥1500 input to output terminals95% non-condensing50 - 100A; B; C-0.53-phase delta or WYE with no connection to neutral10 A resistive @ 125 Vac; 5 A @ 250 Vac; 1/4 hp @ 125 VacIsolierter SPDT≅-3% of the trip voltagePrüfen Order
TVW6510S0.4S 208; 220; 230; 240 Vac0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #8 (M5 x 0.8) screw2 H x 2 W x 1.25 D in. (50.8 x 50.8 x 31.8 mm)0 kg≥1500 input to output terminals95% non-condensing50 - 100A; B; C-0.53-phase delta or WYE with no connection to neutral10 A resistive @ 125 Vac; 5 A @ 250 Vac; 1/4 hp @ 125 VacIsolierter SPDT≅-3% of the trip voltagePrüfen Order
TVW9510S0.4S 430; 440; 460; 480 Vac0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #8 (M5 x 0.8) screw2 H x 2 W x 1.25 D in. (50.8 x 50.8 x 31.8 mm)0 kg≥2500 input to output terminals95% non-condensing50 - 100A; B; C-0.53-phase delta or WYE with no connection to neutral10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/3 hp @ 250 Vac; 277 Vac maxIsolierter SPDT≅-3% of the trip voltagePrüfen Order
TVW8510S0.4S
Auslaufdatum: 05.10.2020
380 400 and 415VAC0.25 in. (6.35mm) male quick connect terminalsSuface mount with one #8 (M5 x 0.8) screw2.00 x 2.00 x 1.25 in. (50.8 x 50.8 x 31.8mm)≅2.8oz (79g)≥2500V RMS input to output terminals95% relative non-condensingABC-0.53-phase delta or wye with no connection to neutralMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/3hp @ 250VAC; max voltage 277VACIsolierter SPDT≅-3% of the trip voltage
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.