PLR Series – Voltage Monitor Series - Littelfuse PLR Voltage Monitoring Relays Provide Superior Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The PLR series is a cost-effective, three-phase voltage monitor that prevents three-phase motor startups during adverse voltage conditions. The proper A-B-C sequence must occur in order for the monitor's output contacts to energize. In addition, the relay will not energize when an undervoltage or phase loss condition is present. The PLR series protects a motor against undervoltage operation. The adjustment knob sets the undervoltage trip point.

Funktionsweise

The output relay is energized and the LED glows when all voltages are acceptable and the phase sequence is correct. Undervoltage must be sensed for a continuous dropout delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied.

Field Adjustment

Turn the adjustment knob fully counterclockwise and apply three-phase power. The LED should be ON. Increase adjustment until the LED goes OFF. Decrease adjustment until LED glows again. If nuisance tripping occurs, decrease the adjustment slightly.

Note: When properly adjusted and operating in an average system, a voltage unbalance of 10 % or more is required for phase loss detection. When a phase is lost while the motor is running, a voltage will be induced into the open phase nearly equal in magnitude to the normal phase-to-phase voltage. This condition is known as regeneration. When regenerated voltages are present, the voltage unbalance during single phasing may not exceed 10 % for some motors. The PLR Series may not provide protection under this condition. For systems that require superior phase loss protection, select the PLMU Series.

Eigenschaften

  • Continuous monitoring
  • Industry standard 8-pin octal plug connection
  • LED-Anzeige

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Phase SequenceInput TypeInput Voltage Maximum (V)Output Load Rating (VA)Output TypeMax. Output
Voltage (V)
Pull-in Response Time (ms)Storage Temperature (F/C)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
Ausgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Input AC Line Frequency (Hz)Input Phase SequenceInput TypeMax. Eingangsspannung (V)Output Load Rating (VA)AusgabeartMax. Output
Spannung (V)
Pull-in Response Time (ms)Lagertemperatur (F/C)BeständeMusterVergleichen
PLR120A 95 - 140 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral1435 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)Prüfen Order
PLR240A 190 - 270 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral2705 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)Prüfen Order
PLR380A 340 - 450 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral4805 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)Prüfen Order
PLR480A 380 - 500 VacSPDTOctal 8-pin plug-inPlug-in socket rated 600V3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 60A; B; C3-phase delta or WYE with no connection to neutral5305 A resistive @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay energized when all voltages are acceptable250≤400; Hysterisis≅2%-40° to 85°C (-40° to 185°F)Prüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.