PLM Series – Voltage Monitor Series - Littelfuse PLM Voltage Monitoring Relays Provide Superior Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The PLM series is a three-phase voltage monitor that continuously monitors each of the three phases. It monitors both delta and wye systems, and a connection to neutral is not required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss, and phase reversal. Protection is ensured when regenerated voltages are present.

Funktionsweise

The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed.

Field Adjustment

Set the voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all three phases, voltage, and phase sequence. If the phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.

Eigenschaften

  • Quick octal 8-pin mounting
  • Proprietary microcontroller-based circuitry
  • LED diagnostics
  • Isolated, 10 A, SPDT output contacts
  • Adjustable, nominal voltage set point
  • Simple 3-wire connection for delta or wye systems
  • ASME A17.1 Rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41-1991 Level B

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input Phase SequenceInput TypeInput Voltage Maximum (V)Output Load Rating (VA)Output TypePhase LossPower ConsumptionReset Time (ms)StockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
Ausgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Input AC Line Frequency (Hz)Input Phase SequenceInput TypeMax. Eingangsspannung (V)Output Load Rating (VA)AusgabeartPhase LossPower ConsumptionRücksetzzeitBeständeMusterVergleichen
PLM6405 200 - 240 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral27010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤2 WAutomaticPrüfen Order
PLM6502 200 - 240 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral27010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤2 WAutomaticPrüfen Order
PLM6805 200 - 240 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral27010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤2 WAutomaticPrüfen Order
PLM8405 360 - 430 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral48010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤3 WAutomaticPrüfen Order
PLM9405 400 - 480 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral53010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤3 WAutomaticPrüfen Order
PLM9502 400 - 480 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral53010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤3 WAutomaticPrüfen Order
PLM9805 400 - 480 VacIsolierter SPDTOctal 8-pin plug-in rated 600 VacPlug-in socket3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)0 kg50 / 100A; B; C3-phase delta or WYE with no connection to neutral53010 A resistive @ 240 Vac 277 Vac max; 1/2 hp @ 240 Vac; 1/4 hp @ 120 VacElectromechanical relay≥35%≤3 WAutomaticPrüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.