SLR Series - Littelfuse SLR Relays Provide Exceptional Solid-State Switching Protection

Baureihe: SLR
Auslaufdatum: 07.10.2020 Verfügbarkeit: Veraltet

Veraltet

Fragen? Support von Littelfuse kontaktieren
External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The solid-state SLR Series Relays are designed for industrial applications requiring rugged, reliable operation. These relays have no isolation between the control switch input and the solid-state output and should be used in systems where the control switch is the same voltage source as the load. The SLR Series provides the reliable, noiseless, and long life of a solid-state relay without the cost of isolation circuitry. The zero-voltage switching SLR2 model can extend the life of an incandescent lamp up to 10 times its normal life. The random-switching SLR1 model is normally used for inductive loads. When fully-insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.

Operation The solid-state output is located between terminals 1 and 2 and can be ordered as either normally open or normally closed when voltage is applied and S1 is open. When S1 is closed, the solid-state output between terminals 1 and 2 closes (or opens). If S1 is opened, the solid-state output will open (or close).

Eigenschaften

  • Induktive Lasten
  • Industrial systems requiring rugged, reliable operation
  • Systems where the control switch is the same voltage source as the load

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Output VoltageOutput
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Dielectric BreakdownHumidityInput Tolerance (%)Insulation ResistanceOpen State Leakage Current (A)Output Load Rating (VA)Minimum Output Holding Current (mA)Output TypeStockCompare
Katalog-Nr.Eingang
Spannung (V)
Output VoltageAusgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Dielectric BreakdownLuftfeuchtigkeitInput Tolerance (%)Insulation ResistanceOpen State Leakage Current (A)Output Load Rating (VA)Minimum Output Holding Current (mA)AusgabeartBeständeVergleichen
SLR1420A
Auslaufdatum: 07.10.2020
120 VAC120 VACSPST; NO0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.51 D in. (50.8 x 50.8 x 38.4 mm)0 kg≥2000 terminals to mounting surface95% non-condensing±20%≥100≅5Steady state: 20 A; Inrush: 200 A; Output Device: Triac≅50Non-isolated Solid statePrüfen
SLR1610A
Auslaufdatum: 07.10.2020
230 VAC230 VACSPST; NO0.25 in. (6.3 mm) male quick connect terminalsSurface mount with one #10 (M5 x 0.8) screw2 H x 2 W x 1.51 D in. (50.8 x 50.8 x 38.4 mm)0 kg≥2000 terminals to mounting surface95% non-condensing±20%≥100≅5Steady state: 10 A; Inrush: 100 A; Output Device: Triac≅50Non-isolated Solid statePrüfen
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.