235P Series - Littelfuse 235P Pump Monitors Provide Exceptional System Protection

External overview image
Zum Vergrößern Mauszeiger über Text bewegen
Hinweis zum Haftungsausschluss

Die Produkte von Littelfuse eignen sich nicht für andere Zwecke (einschließlich und ohne Ausnahmen von Anwendungen im Auto-, Militär-, Raumfahrt-, medizinischen, lebensrettenden, lebenserhaltenden und Nuklearbereich, Geräten, die als chirurgische Implantate gedacht sind bzw. alle anderen Anwendungen, bei denen fehlerhafter oder ausbleibender Betrieb des Produktes zu Verletzung, Tod oder Sachschaden führen kann) als diejenigen, die ausdrücklich in den entsprechenden Produktdokumentationen von Littelfuse aufgeführt sind, und dürfen daher nicht für solche Zwecke eingesetzt werden. Die von Littelfuse gewährten Garantien gelten nicht für Produkte, die für andere als die ausdrücklich in den LittelfuseDokumenten festgehaltenen Zwecke benutzt werden. Littelfuse übernimmt keinerlei Haftung für Ansprüche oder Schäden, die aus der Verwendung von Produkten in Anwendungen, die nicht ausdrücklich von Littelfuse beabsichtigt und in den entsprechenden LittelfuseDokumentationen festgehalten sind, resultieren. Wenn nicht anders mit Littelfuse vereinbart, unterliegt der Verkauf und Einsatz von LittelfuseProdukten den allgemeinen Geschäftsbedingungen für Verkäufe von Littelfuse. „Littelfuse“ umfasst Littelfuse, Inc. und alle seine verbundenen Unternehmen.

The Littelfuse 235P is designed to protect 5-15 hp, 230 V, single-phase pumps from dry-well, dead-head, jammed impellers, rapid-cycle, and overvoltage and undervoltage conditions. A calibration adjustment allows the 235P to be calibrated to your specific pumping applications, reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations causing overcurrent and undercurrent. When an abnormality such as loss of suction is detected, the 235P deactivates its output relay and directly disconnects the pump motor. The 235P communicates with a hand-held diagnostics tool called the Informer (sold separately). The Informer displays parameters including calibration points, trip points, run time, and last faults. An external current transformer is required for operation (sold separately).

Special considerations for pump cables larger than #10 AWG: In some cases where larger motors are installed with deep-set pumps, pump cables are used that exceed the relay's terminal size. In these conditions, a short splice of #10 AWG or #12 AWG may be a solution at the control box. Note: All local, state, and national electric codes should be followed when applying this solution.

NOTE: The 235P model has a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70-90 % of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, increase the sensitivity closer to the 90 % mark, or if you have a very heavy producing well, decrease the sensitivity around the 70 % mark.

Eigenschaften

  • Proprietary microcontroller-based circuitry
  • Onboard sensitivity adjustment
  • Adjustable restart delay
  • Built-in IR communications link
  • LED-Anzeige

Unten können Sie Spezifikationen und Zertifizierungen einsehen, die Verfügbarkeit prüfen und Teile bestellen.

Catalog #Input
Voltage (V)
Input Load Range (hp)Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)Overcurrent Trip ClassInput AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Overvoltage Trip Voltage (%)Rapid Cycle Timer (s)Restart Delay RangeTrip Delay RangeStockSamplesCompare
Katalog-Nr.Eingang
Spannung (V)
Eingangslastbereich (HP)Ausgang
Wechsler
KlemmenartMontagemethodeAbmessungenGewicht (Pfd./g)Overcurrent Trip ClassInput AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Overvoltage Trip Voltage (%)Rapid Cycle Timer (s)Restart Delay RangeTrip Delay RangeBeständeMusterVergleichen
235P 230 Vac5–15 (externer Stromwandler erforderlich)SPSTTorque: 13 in-lbs; Wire: Solid or stranded 10 - 22 AWG#8 screws2.93 H x 5.25 W x 2.91 D in. (73.7 x 133.4 x 74 mm)0 kg125% of calibration point50 / 60 (50 will increase all delay timers by 20%)5A300; 720 VA @ 240 Vac (10 A max.)265 VAC4 restarts allowed in 60 s periodOver/Under Voltage: 2 s; All other faults: Manual; 2 - 225 mOvercurrent: 5 s; Dry-well: 4 sPrüfen Order
235P-ENCL 230 Vac5–15 (externer Stromwandler erforderlich)SPSTTorque: 13 in-lbs; Wire: Solid or stranded 10 - 22 AWG#8 screws8.3 H x 5.36 W x 3.68 D in. (210.8 x 136.1 x 93.5 mm)0 kg125% of calibration point50 / 60 (50 will increase all delay timers by 20%)5A300; 720 VA @ 240 Vac (10 A max.)265 VAC4 restarts allowed in 60 s periodOver/Under Voltage: 2 s; All other faults: Manual; 2 - 225 mOvercurrent: 5 s; Dry-well: 4 sPrüfen Order
Um umweltbezogene Produktinformationen anzufordern, füllen Sie bitte das Anfrageformular für umweltbezogene Produktinformationen aus.